intelligent Calculator

“intelli-Calc”

introduction

Ver.1.30

 
 

概要

このアプリは計算式を入力すると式を解析して逆算や穴埋め計算が出来ます。

例えば、共振周波数を算出する公式

共振周波数 = 1/(2π√(キャパシタンス×インダクタンス))

この式はキャパシタンス(μF)とインダクタンス(μH)から共振周波数を求める式ですが

共振周波数とインダクタンスを決めてキャパシタンスを逆算するといった計算を行いたい場合、予めこの式をキャパシタンスについて式を解く必要がありますが、このアプリは式を自動的に解析して構成する要素について逆演算(穴埋め計算)します。

つまり実際のコンデンサ容量とインダクタンスから共振周波数を求めれば、今度はその式を使って希望する周波数を出すためにコンデンサの容量(キャパシタンス)を逆算することが出来ます。

もちろんコンデンサ容量を固定してインダクタンスを逆算することも出来ます。

式を構成する要素数に制限は有りませんので、

機械設計、電機設計、建築、化学 .... ローン計算、ワリカン計算 応用は無限です。


構成する変数の数や名称に制限がありませんが、以下の制約が有ります。

.同じ名称の変数が複数箇所に有っても単一的に管理します。(V1.20より)

.乗数は変数に出来ません。

.複数の解を持った式は解析できません。

式を構成する予約語が有り下記は変数名に出来ません。

SIN,COS,TAN,PAI,ASIN,ACOS,ATAN,LOG,SQRT,PAI


免責:作者及び関係者は本プログラムの計算結果等において何ら責務を負うものではありません

   別途十分な検証を行ってください。

 

Summary

This app can be back-calculated by analyzing the expression and enter the expression.

For example, the equation for calculating the resonant frequency

Resonance frequency = 1 / (2π√ (capacitance × inductance))

Although this expression is an expression to determine the resonance frequency from capacitance and inductance

If you want to calculate such Decide the resonance frequency and inductance calculated back capacitance, but you have to solve in advance this equation for capacitance, this calculator is inverse operation for the variable to be constructed by automatically analyzing the original expression you.


There is no limit to the number and names of the variables that make up, but there are the following restrictions.

1. single managed even if there at a plurality of locations variables of the same name. (From V1.20)

2. The multiplier can not be a variable.

3. having a plurality of solution expression you can not be parsed.

Below there is a reserved word that make up the formula can not be a variable name.

SIN, COS, TAN, PAI, ASIN, ACOS, ATAN, LOG, SQRT, PAI


Disclaimer: The author and Formulas is not responsible in any way in the calculation results of this program

Please go separately sufficient verification.

Created by Taku’s Polaris Works LTD

Shimada SHIZUOKA JAPAN 2015..2017

注意:使用においては必ず式の検証確認を行ってください 

Note: Please use Make sure that the calculation result is correct

Ver1.30 170124

UIを改善しました

モールス信号を学習する機能をコンパクトなiPhoneに実現しました。

通勤の移動中にも学習することが出来ます。

モールス信号音をマイクで拾って文字列に復調することも出来ます。

iPhoneのマップを使って建造物の面積、距離を計測します。

任意の2箇所にピンポイントを設定するとピンの位置からその距離を計測、同様にピンを使って範囲指定すると面積を算出します。

測定点と情報は保存し一覧表から選択し再現表示することが出来ます。

GPSString

iPhone Application

intelli-Morse

iPhone Application

Polaris Works Products